Steel - Nang embedded ceramic wear elbow

Steel - inlaid ceramic wear elbow is the company learned of similar products at home and abroad on the basis of advanced technology , developed a steel - inlaid ceramic wear elbow ( declared national patent ) , it will be its high hardness ceramics , high wear resistance and high toughness steel , workability , weldability, strong together. It is ultra-high abrasion resistance, light weight , moderate cost, making it a powerhouse of similar products .

An outer camp for steel welding
Second, the inlay AL2O3 sintering , anti- shedding ceramic piece steel battalion with adhesive bonding , anti- shedding tiles themselves into pressure on three sides and is pressed state. Ensure that the tiles do not fall off .
Third, there is a cone in tiles firmly screw penetrating tiles and steel plate ( perforated plate ) screw penetrating steel and steel plate welded into one in leather tapered holes , glue and stability screws, double insurance of the mosaic tiles in the inner wall of the steel business .
Fourth, the mosaic structure of

GXT wear-resistant ceramic coating the inner wall of the elbow finished photos

Steel - inlaid ceramic wear elbow Features

Ultra-high wear resistance
1, AL2O3 ≥ 95% ceramic is more than 10 times the wear resistance of steel .
2 , extra-thick wear layer. ( Based on user requirements change wear layer 6mm-9mm)

Double anti- deciduous
1 , the use of anti-shedding tiles, ceramic structure between three surface pressure and being pressed .
2 , diameter 4-6 a week of solid Luo , tapered hole penetrating the center of tiles , outer wall with steel welded into one .

Low cost
1, the price and the " 863" is quite complex ceramic tube
2 , the price is 60% -80 % of the bi-metal abrasion elbow

High temperature resistance
Range -50 ℃ --- 400 ℃ long run
Tiles 3 - 4 × 10-6 / ℃ expansion coefficient
Glue 6-8 × 10-6 / ℃ expansion coefficient
Pipe 12 × 10-6 coefficient of expansion
So it has good thermal stability

The main technical parameters
AL2O3 ≥ 95%
Wear layer 6mm-9mm
Wear layer hardness HRA ≥ 80
Temperature -50 ℃ --- 400 ℃
≥ 325mm diameter curved Specifications

Anti- shedding resistant ceramic reinforcement piece for the factory 99 years development of proprietary products , which effectively solve the problem of wear of ceramic tiles off three sides of each pressure piece itself , plug the state to prevent the loss , the center has a tapered hole tiles , Rose made ​​with tapered nails and wear a solid piece welded into one , again to protect the stability of the tiles .